SAC UMAC S24.0, Instruction Manual

Page: 14 / 24

Professional Amplifier
14
2. You can check the DHCP Mode and IP Address setting.
After confirming, click the OK button at the bottom right. 2. You can check and edit the Static Mode and IP Address,
Subnet, Gateway settings.
Network Setup allows you to set the network mode of the SAC S-series Amp. The network mode setting allows
DHCP and Static IP settings. The basic network is DHCP IP configuration.
You can check the DHCP IP setting.
How to check the DHCP IP Address setting is as follows.
1.6 Network Setup
1.6.2 DHCP IP
You can check and edit Static IP Address, Subnet, and Gateway.
How to check and edit IP Address, Subnet, and Gateway is as
follows.
1.6.1 Static IP
1. Select the Network Setup icon 1. Select the Network Setup icon.
3. When changing from Static to DHCP setting mode, pop-up
appears. 3. When changing from DHCP to Static setting mode, popup
appears.
1 1
2
3
2
3