SAC UMAC S2.5, Instruction Manual

Page: 11 / 24

6
3
11
Professional Amplifier
NMS
Network Monitoring System
1.1 Dedicated Software: NMS
NMS is a dedicated GUI (Graphic User Interface) program to operate SAC S-series Amp.
The monitor information of the SAC S-series Amp has Title, Model Name, Network connection status, Location, Audio Signal, Clip
Signal, Protection Signal, Bridge status and temperature.
You can also configure the network with Network Setup. PC, MAC and the latest software is available at www.sac-audio.com
[NMS GUI]
The NMS, which is dedicated software for the SAC S-series Amp, can be installed on PC and MAC. The specifications
applicable to NMS are as follows. Before installing the software, check the computer virus and install the software.
2. CPU: 1GHz or higher and 32bit or 64bit processor
3. RAM: 32bit is more than 2GB, 64bit is more than 4GB
4. HDD: 32bit is more than 16GB, 64bit is more than 20GB
5. Display: DirectX 9 Graphics device. Over 1024 x 768 resolutions
1.2 Computer Requirements
Proceed as follows to install the NMS Software
1.3 Install dedicated software for the computer
1. Download the latest NMS to your computer from the SAC website
(www.sac-audio.com)
2. Unzip the downloaded NMS file
3. Double-click the unzipped NMS installation file to run it.
4. Select the location you want to install and select the Start menu
folder. Follow the installation wizard’s procedure that appears on
your computer screen.
5. When installation is complete, click “Finish” button.
6. When you click “Finish” button, a shortcut icon for NMS will be
created on the desktop.
NMS is a function that remotely checks the operation status of AMP through network and works with
dedicated software.
Applied products: S-series Amp, DNL P-series speaker, Matrix P Amp