Page # 22
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
CONTROL CONSOLE AND DISPLAY
Located beside the truck driver’s seat is the control console. The control console houses all of the main control
switches necessary to operate the machine. Most machine configurations have the following switches and arrange-
ments. Arrangements can vary according to chassis setups.
The auxiliary shift switch
is used to change the gear range of the auxiliary transmission of the truck chassis
(If so equipped). To avoid loss of drive the shift switch should only be used when the vehicle is at a stand still
and the transmission is in the neutral psoition. Do not attemp to change the auxiliary transmission while in
motion.
The reversible radiator fan overide switch
can be used at any time. The radiator fan is set to reverse itself
at a predetermined time interval to help eleviate excess dust and debris buildup on the radiator. This button
allows the operator to reverse the airflow on the radiator and should be used if there is a noticeable increase
of dust or debris on the radiator or if there is a spike in the engine water temperature.
The hour meter
registers how many hours the mixer is in operation.
The bunk light switch
is an on-off switch that controls the flip chute and rear bumper lights.
The master power switch
supplies the electrical power to the auger and reel control box.
The auger power switch
controls the electrical power to the auger speed control.
The reel power switch
controls the electrical power to the reel speed control.
The auger and reel control knobs
are connected directly to the hydrostatic pumps that drive their respective functions.
These are used to control the speed of the augers and the reel independantly.
The high speed cleanout button
can be used to overide the speed settings of the augers and reel. When depressed it
will bring the augers and reel up to their maximum RPM. It will only overide the speed setting of either the augers or reel
if their power switches are turned on. It will not activate the augers or the reel if their power switch is turned off.
Scale Head
Control Switches
Fuse/Relay Box
Summary of Contents for TURBO-MAX 6190
Page 64: ......
