Page # 10
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
• Be sure the inside of the mixer is clear of any obstruction before operating.
• Use caution when working around the discharge area. Stay clear of power chute & slide tray. These are
controlled from the cab and could operate without warning, creating pinch points which could cause severe
injury or death. Always stop tractor engine and remove PTO driveline & hydraulic hoses before working
near the discharge area.
• Never attempt to release jammed materials or clean materials from any area of the mixer or discharge
chute without stopping engine and removing driveline first. Moving parts can be hidden by materials, and
stopped parts can start unexpectedly, causing severe injury. Always stop tractor engine and remove the PTO
driveline so that the mixer before attempting to remove jammed material or to clean.
• Never put arms or feet inside unit, power chute, or near discharge door opening, nor climb on or in the mixer
while it is running. NEVER allow anyone to position themselves over or near the top of the mixer while it is
running. Rotating augers and sprockets can grab clothing or create pinch points which can cause severe
injury or death to the operator or bystanders. Always stop tractor engine and remove the PTO driveline so
that the mixer cannot be accidentally turned on while inspecting, servicing, repairing, or cleaning.
• Following operation, or when unhitching, stop tractor or towing vehicle, set brakes, shut off engine and
remove the ignition key.
• Store unit in an area away from human activity.
• Do not park equipment where it will be exposed to livestock for long periods of time. Damage and
livestock injury could result.
• Do not permit children to play on or around stored unit.
• Make sure all parked machines are on a hard, level surface and engage all safety devices.
• Wheel chocks may be needed to prevent unit from rolling.
FOLLOWING OPERATION
HIGHWAY AND TRANSPORT OPERATIONS
•
SAFETY CHAINS:
If equipment is going to be transported on a public highway, always follow state and
local regulations regarding safety chains and auxiliary lighting. Be sure to check with local law enforcement
agencies for your own particular regulations. If required, safety chains should be obtaines and installed
Only safety chains (not elastic or nylon/plastic tow straps) should be used to retain connection between
towing and towed machines in the event of separation of primary attaching system. Use a high strength,
appropriately sized hitch pin with a mechanical retainer and attach safety chains. Criss cross chains under
tongue and secure to draw bar cage, mounting loops, or bumper frame.
• Adopt safe driving practices:
- Keep brake pedals latched together at all times.
NEVER USE INDEPENDENT BRAKING WITH
MACHINE
IN TOW, LOSS OF CONTROL AND/OR UPSET OF UNIT CAN RESULT.
- Always drive at a safe speed relative to local conditions, ensure that your speed is low enough for an
emergency stop. Keep speed to a minimum.
- Reduce speed prior to turns to avoid risk of overturning.
- Always keep tractor or towing vehicle in gear to provide engine braking when going downhill.
Do not coast.
-
Do not drink and drive!
SAFETY
Summary of Contents for MAXI-MIXER 4700 TRAILER
Page 56: ......