Sabre DL700, User Manual, Page: 6 / 12

6
STEP 4 - Internal Lever Install
Backing Plate Install Internal Lever - Install
• Attach rubber gasket to internal plate
• Place external cable clip through internal plate
slot and secure plate by screwing M5x fixing
screws into external lever threaded posts
• Connect the internal lever cable clip to the external
lever cable clip
• Feed the excess cable through the plate slot and into
the door cut-out
• Place the attached clips into the battery casing slot.
Ensure attached clips lay flat against the plate as not to
interfere with the batteries
• Attach Internal lever to plate using M3 Fixing screws
Connect external and
internal lever cables
Place connectors in
battery case slot
STEP 3 - External Lever Installation
Assembly Installation
• Insert threaded post screw into plate slot and secure
threaded post
• Secure bottom threaded post
• Insert spindle into spindle hub and secure with split pin.
Ensure arrow on spindle hub is pointing down (important)
• Fit rubber gasket to escutcheon
• Insert spindle through latch spindle hub and cable
through slot in door.