5.4.8 End of mowing
When you have finished mowing, disengage the blades, lower the engine speed and
ride the machine with the cutting deck raised as high as possible.
5.4.9 End of work
Stop the machine, move the throttle to «SLOW» and turn
off the engine by turning the key to «OFF».
When the engine has stopped, close the fuel stopcock (1)
( if
fitted).
To avoid backfire, position the
throttle on «SLOW» for 20 seconds before stopping
the engine.
Always take out the ignition key before leaving the machine
unattended!
To keep the battery charged, do not leave the key in the «ON»
position when the engine is not running.
5.4.10 Cleaning the machine
After use, clean the outside of the machine, empty the grass-catcher and shake it to
remove grass and other debris.
Always empty the grass-catcher and do not leave containers
full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and detergent,
taking care not to wet the engine, the electrical parts or the electronic circuit board
located under the dashboard.
Never use hose nozzles or harsh detergents to clean the body-
work or the engine!
When washing the inside of the cutting deck and the collector channel, the machine
IMPORTANT
!
WARNING!
IMPORTANT
!
WARNING!
!
WARNING!
➤
23
EN
HOW TO USE THE MACHINE
1
