Sabio CM1, Setup Manual

Page: 40 / 53

Once that is done, you will need to type in the IP address where your CM1 can be located. This
is
NOT
the IP address of the CM1 itself, as this is most often a private IP address. This is the
address of your cable modem or DSL modem. For your benefit, the folks at DynDNS.com have
conveniently provided the public IP address of your network just below the entry blank
(figure-30)
.
If you are filling this information out while you are on the same network that the CM1 is
attached to, then this address will be correct, and you can just click on this link and the
number will be filled in for you.
If you are filling this form out while you are on a different network, then this number will NOT be
correct and you will need to open a browser on a computer attached to the same network as the
CM1 and go to the site www.whatismyip.com. This will tell you the IP address that you will need
for this part of the form.