SCLO 200M
Date: Dec 23.2020 Version 1.03
Public version
Product Manual
12
of 24
SABIK Oy
· BOX19 · FI 06151 Porvoo · Tel358 -19- 560 1100 · www.sabik.com
On the
CONFIGURATION
page, you can change the lanterns
configuration by tapping the small >-shaped symbol on the right side of the
setting’s name. If needed, expand the block to see the advanced settings.
When, for example, LED Intensity is selected, you will be able to adjust the
intensity by writing the range (in NM) or adjusting the intensity in percent.
You can write the percentage or select it by swiping the numbers up or
down.
Tap Cancel to cancel or Write to send the updated value to lantern. The
edited parameter is immediately stored in the lantern and the new value
flashes briefly after it has verified by the lantern.
If the set value is too high or low, a warning message is shown and the
value cannot be stored.
