EN
40
This menu allows modifying the operation parameters of
the thermostat (probe values, view of the window con-
tact, propable alarms).
With the control set on “
OFF”
, press the
“+”
and
“-”
but-
tons simultaneously for 3 seconds.
Select the desired parameter to be modified, pressing
button “+” or “-” and confirm using the “
M
” button.
Once the parameter is selected, the value will be
displayed.
To exit the menu, press the “
M
” button for more than 5
seconds.
FEATURES FOR FACTORY
> 3 sec.
Visualizzazione valore sonda aria T1
View Air T1 probe value
Visualisation de la valeur de la sonde d’air T1
= Sonda non collegata
diS = Probe is not connected
= Sonde non branchée
Visualizzazione valore sonda T2
View T2 probe value
Visualisation de la valeur de la sonde T2
= Sonda non collegata
diS = Probe is not connected
= Sonde non branchée
Visualizzazione valore sonda di minima T3
View T3 minimum probe value
Visualisation de la valeur de la sonde de minimale T3
= Sonda non collegata
diS = Probe is not connected
= Sonde non branchée
= Nessun allarme
--- = No alarm
= Aucune alarme
Visualizzazione stato del contatto finestra
View status of the contact window
Visualisation état du contact fenêtre
= Chiuso
C
= Closed
= Fermée
= Aperto
O
= Open
= Ouvert
Visualizzazione di eventuali allarmi presenti
View any alarms
Visualisation des éventuelles alarmes présentes
Visualizzazione del valore di tensione inviato all'inverter dal master (solo versione ECM)
Display of the voltage sent from the master inverter (only for ECM version)
Visualisualisation de la valeur de tension envoyée à l’onduleur du maître (seulement version ECM)
= Sonda T2 guasta
AL2 = Faulty T2 probe
= Sonde T2 en panne
= Sonda T1 guasta
AL1 = Faulty T1 probe
= Sonde T1 en panne
= Sonda T3 guasta
AL3 = Faulty T3 probe
= Sonde T3 en panne
= Configurazione dip Master errata
AL4 = Incorrect configuration Master dip
= Configuration dip Maître erronnée
= Configurazione dip T-MB errata
AL5 = T-MB incorrect configuration dip
= Configuration dip T-MB erronnée
= Trasmissione RS485 guasta (Master/Slave)
AL6 = RS485 transmission failure (Master/Slave)
= Trasmission RS485 en panne (Maître/Esclave)
= Trasmissione TTL guasta (T-MB/Slave)
AL7 = TTL transmission fails (T-MB/Slave)
= Trasmission TTL en panne (T-MB/Esclave)
F
UNZIONE
F
UNCTION
F
ONCTION
D
ESCRIZIONE
/ D
ESCRIPTION
/ D
ESCRIPTION
S
TATI
/ S
TATUS
/ E
TATS
P1
P2
P3
FF1
ALL
Usc1