Saber Edge LM-22AHD Operator'S Manual Download Page 4

4

• Do not pull machine backward unless

absolutely necessary.  Always look down and

behind before and while moving backward.

• Never direct discharged material toward

anyone. Avoid discharging material against

a wall or obstruction. Material may ricochet

back toward the operator. Stop the blade when

crossing gravel surfaces.

• Operate machine only in daylight or good

artificial light.

• Never operate machine while under the

influence of alcohol or drugs.

• Never operate mower in wet grass.  Always be

sure of your footing; always walk while

keeping a firm hold on the handle; never run.

• Disengage the drive system, if so equipped,

before starting the engine.

• If the machine should start to vibrate

abnormally, stop the engine and check for the

cause immediately. Vibration is generally a

warning of trouble.

• Lightning can cause severe injury or death.  If

you see lightning or hear thunder in the area,

do not operate the machine; seek shelter.

• Stop the engine and wait until the blade

comes to a complete stop before cleaning the

machine, removing grass catcher, or unclog-

ging the discharge guard.

Warning: Slopes are a major factor related to slip 

and fall accidents, which can result in severe injury. 

Operation on all slopes require extra caution. If you 

feel uneasy on a slope, do not mow it.

Mow across the face of slopes; never up and

down. Exercise extreme caution when changing

direction on slopes.

Do not mow on wet grass or excessively steep

slopes. Poor footing could cause a slip and fall

accident.

• 

Watch for holes, ruts, bumps, rocks, exposed roots

or other hidden objects. Uneven

terrain could cause a slip and fall accident. Tall

grass can hide obstacles.

Do not mow near drop-offs, ditches, or

embankments. You could lose your footing or

balance.

Read and understand the contents of this manual 

before you start the engine.
Obey all safety messages that follow this symbol 

to avoid possible injury or death. Improperly using 

or maintaining this mower could result in injury 

or death. To reduce this potential, comply with the 

following safety instructions.
The following instructions have been adapted 

from the ANSI/OPEI standard B71.1-2003.
This cutting machine is capable of amputating 

hands and feet and of throwing objects.   

Failure to observe the following safety  

instructions could result in serious injury or 

death.

Safety

Slope Operation

General Operation

NOTE: Determine the left and right sides of the 

machine from the normal operating position

•  Read, understand, and follow all instructions on

the machine and in the manual(s) before

starting. Keep this manual in a safe place for

future and regular reference.

• Do not operate machine without the entire grass

catcher, proper guards, plates or other safety

protective devices securely in place and

working.

• See manufacturer’s instructions for proper

operation and installation of accessories. Only

use accessories approved by the manufacturer.

• Do not put hands or feet near or under the

machine.

• Keep clear of the discharge opening at all times.

• Only allow responsible adults, who are familiar

with the instructions, to operate this machine.

• Never leave a running machine unattended.

• Be sure the area is clear of people and pets

before operating.  Stop machine if anyone enters

the area.

• Clear the area of objects such as rocks, sticks,

toys, wire, etc., which could be thrown by the

blade.  Stay behind the handle when the engine

is running.

• Always wear substantial footwear while

operating. Never operate the machine

barefooted or while wearing   sandals or open

toes shoes.

• Always wear protective eyewear (safety googles/

safety glasses

 

with side shields

while operating

.  

Shorts should never be worn while operating

Summary of Contents for LM-22AHD













Reviews: