19
OPERATING MANUAL
STARTING THE ENGINE
PRE-OPERATION CHECK
1. Check that all shields and covers are in place, and all nuts, bolts, and screws are tightened.
2. Check the engine oil level. Add oil if low. Do not overfill. Running the engine without
sufficient oil can cause unrepairable damage.
3. Check fuel level. Add fuel if low (fresh unleaded RON 91 recommended). Starting with a
full tank will help to eliminate or reduce operating interruptions for refuelling. Check fuel
system components and lines for signs of leak.
4. Check battery level. If the battery level is unable to start the engine, charge it with the 12V
charger included in the package.
RCBO SAFETY CHECK
1. Lift the clear plastic cover on the panel to access the RCBO safety toggle switch.
2. TEST THE RCBO before each and every use by pressing the test button. This will
immediately cause the unit to trip and shut off the power to the socket outlets. If the RCBO
fails to switch OFF after depressing the test button (marked “T”) then the unit should be
immediately taken out of service, tagged appropriately and not be used until repaired by a
qualified electrician.
3. RESET THE RCBO by simply switching the RCBO toggle to ON position.
4. The unit is now ready for operation. No electrical device should be operated or plugged in
prior to checking for physical damage and testing of the RCBO.
Fill oil to the
bottom lip of the
dipstick
