IN-STAND
1
9
Device programming
IR-Multicode - IR Remote Setup :
The IR-Multicode system allows you to use any infrared
remote control from most popular TV screen manufacturers using RC-5 Code. You can
program the remote control with which you control your TV. Some newer remotes might work
on a Wi-Fi/Bluetooth bandwidth and, although they might look like a standard remote, they
use a completely different wavelength. Please be advised, that
you will need the IR-EYE
Sabaj Accessory connected to the controller via the RJ-45 socket to operate your lift
with an IR remote
. To start acquiring the IR remote controls :
a. Press button "B" on your device to enter setup. You will hear constant beep signal.
b.
Aiming your remote towards the IR-Receiver, press
4 buttons
you want to use for
controlling the unit. Every properly acquired signal will be confirmed by a number of
short "beep" signals. Please allow the number of beeps corresponding to a function
below to finish sounding , before pressing another button . Number of signals
correspond to the button set:
(I)
–
rotate clockwise
(1 constant signal)
(II)
–
rotate counterclockwise
(2 s constant signal)
(III)
–
M1 position
(3 s constant signal)
(IV)
–
M2 position
(4 s constant signal)
„B” Button
„A” Button