Saba SB50UHD18, Instruction Manual, Page: 89 / 112

Menu Operation
– DiSEqC1.1: You can choose one of sixteen satellites. Used to choose proper
device.
– Motor: Sets the positioned type between DiSEqC1.2 and DiSEqC1.3.
When motor is set to DiSEqC1.2 or DiSEqC1.3:
Set position: Press the red button to set position.
Move Auto: Rotates the antenna automatically.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
– DiSEqC1.0: You can choose one of four satellites. Used to choose proper device.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Store Position: Store current position as the selected positioner limit.
Goto Position: Rotates the antenna to the stored satellite position.
Goto Reference: Drive antenna to zero position.
Set Limit: Press the green button to set Limits to the scope of satellite Antenna
rotation.
Move Continue: Rotates the antenna until the rotation has been completed or
Stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a fine adjustment.
Set West Limit: Set the West limit value.
Set East Limit: Set the East limit value.
Goto Reference: Drive antenna to zero position.
Disable Limit: Delete Limit settings. Allows the antenna to rotate over the full arc.
Cancel east limit and west limit.
Set Location: Press the yellow button to set Location.
Location: Longitude Direction, Longitude Angle, Latitude Direction, Latitude Angle
can be adjusted When the Location is set to Manual.
Longitude Direction: Sets the Longitude direction for the location.
Longitude Angle: Sets the Longitude angle for the location.
Latitude Direction: Sets the Latitude direction for the location.
Latitude Angle: Sets the Latitude angle for the location.
– Select the single cable settings.
– Search: When you are satisfied with you setting, press
the OK/
► button.
Unicable:
– Reset: Reset all Satellite Settings to the factory defaults.
Goto X: Moves the antenna to the location specified by the Set Location.
• DTV Manual Tuning: Manual store for DVBS2 channels.
1. Press the
▲/▼ button to select the desired sub
item.
2. Press the arrow buttons to select the desired
value.
3. When setting is completed, select Search and
press the OK button to start channel tuning.
4. Press the EXIT (
) button to exit.
Frequency < 0 MHz >
Symbol < 0 >
Polarization <
Vertical Pos .
>
Search
Satellite
ASTRA 1H 1KR...v
DTV : 0 Programme(s)
Radio : 0 Programme(s)
Data : 0 Programme(s)
Quality
Strength
DTV Manual Tuning
Service Type < All >
Scan Mode < All >
23