Saba SB32HDS195, Instruction Manual

Page: 87 / 109

Menu Operation
22
– Completion of the above settings and press the OK button to start the auto Start:
searching.
• DTV Manual Tuning: Manual store for digital channels.
Modulation, Scan Mode and
are
needed in order to add a
in DVB cable mode. Please
service provider about the correct values. When
setting is completed, select Search and press the
OK button to start channel tuning.
Symbol < Auto >
Modulation < Auto >
Scan Mode < Al l >
Search
Frequency < 8 KHz > DTV : 0 Programme(s)
Radio : 0 Programme(s)
Data : 0 Programme(s)
Quality
Strength
DTV Manual Tuning
Service Typ e < Al l >
• ATV Manual Tuning: Manual store for ATV
channels.
1. Press the▲/▼ button to select items.
2. Press the ◄/► button to adjust it.
3. When setting is completed, Press the ▼ button to
select “SAVE” to save it.
• Dynamic Rescan: Switch the Dynamic Rescan function
On or Off.
ATV Manual Tuning
Storage To
< 1 >
Current CH
System
Search
< 1 >
< BG >
<
867875 Khz
>
Save Exit
Frequency, Symbol,
Service Type values
programme correctly
inquire of the cable
• • Programme Edit
Press the▲/▼buttons select the Programme Edit, then
press the
OK
button to enter sub-menu.
1. Press the ▲/▼ button to select a channel.
2. Press the ◄/► button to select the following or
preceding page.
3. Delete: Press the RED button to delete the
Favorite:
Press the Green button to set
the favorite channel.
Move: Press the YELLOW button to set the channel
to moving state, and then press the ▲/▼
to move it to the position you want to put.
Skip: Press the BLUE button to skip the
channel. (Your TV set will skip the channel
automatically when using to view the channels.)
Programme Edit
9.2 Rede TV! 3D
1.2 NHKAm9g2be15~
9.1 Rede TV! HD
1.1 NHKAm9g1be15~
1/1
Delete
Favorite
Skip
Page +/-
Move
◄/►
• CI Information (In DTV mode): This function enables you to watch some encrypted
services (pay services). Please insert CI card into the CI slot according to the arrow
on the CI card.
NOTE:

The function can only be gotten when CI slot is available.

This OSD is only for illustration and the menu options and screen format will vary
according to the Digital pay services provider.

It is possible for you to change CI (Common Interface) menu screen and service by
consulting your dealer.

Please do not insert or pull out the CI card when power on.

Do not insert or pull out the CI card frequently so as to avoid any damages of the
TV and the CI card.

During initialization of the CI card, please don't operate the TV.
• Signal Information (In DTV mode): Display the current Signal Information.
channel.
buttons