Saba SA-HX03, Instruction Manual, Page: 17 / 20

1.Connect the power supply
Insert the output end of supplied adaptor into the connector on the bottom of air
purifier,make sure the filter and the bottom cap is fully assembled ,then put the
air purifier on flat surface like desk,plug the adapter into the power outlet.
WARNING:To make sure safety operation of the air purifier,
please always use the supplied adaptor to avoid any
accident or injure.
2.ON/OFF
Plug in the air purifier, it will enter into standby status(no light indicator), press
“ON/OFF”button to enter low speed mode(the indicator turn to green light),
press again “ON/OFF”button, the air purifier will be powered off.
3.Speed
The air purifier has three different speeds. Press “ON/OFF”button to enter low
speed mode, the left indicator above the SPEED button will turn on in green
light , press”SPEED” button one time will turn to medium speed, the right side
indicator light above the SPEED button will trun on. Press”SPEED” button
again will turn to high speed,both indicator lights above the SPEED button will
turn on.Press “SPEED” button again to turn to low speed.
4.Ionizer
The ionizer will operate after the air purifier turn on 30 seconds.
5.Timer setting
The air purifier can be programmed to turn off after a preset amount of time.
Press the “TIMER” button to program the timer between 2H-4H-8H-OFF. The
timer indicator light will turn green when timer function is on.
6.UV Lamp
Press “UV” button one time will turn on the UV lamp and the photocatalyst
filter, press “UV” button again will turn off the UV function.
7.Filter replacement indicator
The filter need to be replaced after use of 1000 hours. When the filter replacement
indicator turn to red color, press “Timer+UV” for 3 seconds to turn off the indicator ,
the air purifier will be reset for the new filter.
控制面板
USAGE METHODS
16