6
How to use Videotext?
(If included)
Press the key
text
to display the Summary
(page 100).
Calling up a page
Enter the 3 digits of the number (e.g. 150,
170) of the page you want to read. After a
few moments, the page will be displayed.
To visualise the next or previous page,
press the directional keys Left/Right.
Auto-scrolling pages
You may stop the page scrolling with the
red key. This has the effect that STOP is
displayed instead of the page number.
When pressing the red key again,
page scrolling will start again.
Prize competitions
By means of the green key, you can either
display or hide the solutions.
Zoom
With the yellow key, you can subsequently
enlarge the upper and the lower half of the
screen page and then switch back to full
screen page display.
Videotext display
The blue key enables you to superpose
a videotext page on the standard TV
picture and to switch back to
the standard TV picture.
Fastext
When videotext pages are broadcast as
per the Fastext standard, you can use the
corresponding colour keys to select one out
of the 4 headings displayed in the footer.
Selection of a given heading may have the
effect to display further headings.
Use the directional keys Up/Down to switch
over between standard TV programme and
Fastext display.
Certain programmes use videotext to
broadcast subtitles, as well as constantly
updated news. These pages can be found in
the videotext summary. Once you have found
the page, the subtitle and/or news will be
superposed on the TV picture.
To leave videotext, press
exit
.
How to prevent the TV set from being
operated?
Hold key
B
on the remote control down for
over 4 seconds until the red LED on the TV
set flashes.
The keys of the TV set are now locked and
switching it on again will be possible by
means of the remote control only.
Keep the remote control out of the reach of
children.
To unlock the keys of the TV set, make use
of the number keys on the remote control.
The keys of the TV set will also remain locked
after timer-programmed switching-off.
The lock function will also be activated
when the TV set is switched on standby or
switched off with its On/Off switch before the
time remaining until programmed
switching-off is over.
How to switch off the set?
To switch the TV set off, press the key
B
on
the remote control or use the On/Off switch
on the TV set.
When the selected channel broadcasts no
programme, the TV set will be switched off
automatically after a couple of minutes.
