GB
3
1. Aerial Socket
Enables connection of the aerial and, if required, a video recorder (see manual for latter).
To tune the channel reserved for your video recorder, start up the recorder then carry out
MANUAL CHANNEL SETTING operations.
Store at programme 99 if you have a SECAM video recorder or at any programme ending with a 9
(9,19,29, etc.) if you have a PAL recorder.
Each time you use the video recorder, switch to the channel assigned to it.
2. SCART Socket
This is used to connect:
– a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder,
– a PAY TV decoder,
– a video games console.
To use the connected device, select the audiovisual programme by pressing the
button.
This selection is automatic for some devices.
AV is displayed at the bottom of the screen.
If you have an S-VIDEO device, press the
button again. S-VIDEO is then displayed at the bottom
of the screen for a few seconds.
When you switch off the device and if you have not changed channel during play, the TV set
automatically returns to the previous channel.
If the TV set has been switched on by the video recorder, it will be placed on stand–by when the video
recorder is switched off.
3. Audio / Video CINCH Sockets
These are used to connect a VHS or 8 mm camcorder.
Press the
button to select the audiovisual programme to view your recordings.
When you switch off the connected device, the TV set remains in audiovisual (AV) mode.
Call up the channel you wish to watch using the numerical keypad on the remote control.
In order to maintain the optimum sound and picture quality of your TV set, avoid connecting 2 devices
to the SCART socket and the AUDIO/VIDEO sockets simultaneously.
