Saba LVSLS11C45GZ17IX, Manual

Page: 30 / 35

1� Turn the water tap on�
2� Open the dishwasher door�
3� Check the filters�
• Ensure they are clean and properly positioned� See “Cleaning
and maintenance” section�
4� Check that there is rinse aid and salt�
5� Load the dishes�
• Ensure that the spray arms can rotate freely�
6� Add the required amount of detergent into the dispenser
according to the “Washing Programmes” chart�
7� Close the dishwasher door securely�
8� Press to switch on the dishwasher�
9� Select the desired washing programme by repeatedly pressing
• The corresponding washing programme indicator light will
flash�
• Delay : The delay start function allows you to delay the start
of a washing programme from 1 hour to a maximum of 24
hours�
Repeatedly press until the desired start delay
time flashes on the display, e�g� 3H for a 3-hour delay�
Once the delay timer has been set, press to
activate the function�
The corresponding start delay time will stop flashing�
10� If you use 3-in-1 tablet, press to select the 3 in 1-tab
Starting the Dishwasher
57 56
GB GB
function�
• The corresponding indicator light will flash�
• The function is available only when you select the intensive,
ECO or light programme�
11� Start the washing programme by pressing
12� At the end of the washing programme, the dishwasher will
buzz and automatically stop�
13� Wait for about 15 minutes before you open the dishwasher
door in order to avoid burns�
14� Unload the dishes
The washing cycle will not start if the dishwasher door is left
open or not properly closed�
Do not open the door when the dishwasher is working since
hot water may be ejected, which could cause scalding�
Adding extra crockery
1� Without switching off the appliance, press to
pause�
2� Open the door, taking care to avoid the escaping steam�
3� Place the crockery inside the dishwasher�
4� Close the door and press � The cycle will start
from the point at which it was interrupted�
Modifying a washing programme in progress
If a mistake was made during the washing programme selection
process it is possible to change the programme�
1�
Press to turn off the appliance and then press
again to turn it on�
2� Repeatedly press to select a new programme�
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
//
//
//
//
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE
_
ARRÊT
MARCHE _
ARRÊT
MARCHE _
ARRÊT
MARCHE _
ARRÊT
MARCHE _
ARRÊT
MARCHE _