Adjust the Volume
– Press the
VOL +/–
buttons on the main unit or on the remote control to adjust the volume�
– If you wish to turn the sound off, press the
MUTE
button on the remote control� Press the
MUTE
button again or press
VOL +/–
button to resume normal volume�
Select the Equalizer
Press the
EQ
button on the remote control repeatedly to select:
[Pop] - [Classic] - [Jazz] - [Rock]
Adjust the Brightness
Press the
DIMMER
button on the remote control to select brightness level�
Set the Clock
Manual Setting the clock can only be done in
STANDBY
mode�
1 In
STANDBY
mode, press and hold the
CLOCK
button on the remote control until the hour digits
are flashing�
– Press the button on the main unit to select 12/24 hour format�
2 Press the / buttons on the remote control to adjust the hour digits while flashing, then
press
CLOCK
button on the remote control to confirm, then the minute digits will flash�
3 Press the / buttons on the remote control to adjust the minute digits while flashing, then
press the
CLOCK
button on the remote control to confirm�
– Each activated state will be cleared if any buttons are not pressed within 15 seconds�
•
Time Display
– Press the
CLOCK
button to show the current time on the display for a few seconds�
•
Synchronization the Clock
When in STANDBY mode, press and hold the
L/MENU
button on the remote control to synchronise
the clock� Press the / buttons on the remote to switch the clock synchronization modes:
RDS
Only synchronize with the RDS radio station�
OFF
Turn off the clock synchronization function, only adjust the clock manually�
Then press the button on the remote control to confirm�
Set the alarm Timer
– The clock must be correctly set for the timer to operate correctly�
1� In
STANDBY
mode, press and hold the
TIMER/SLEEP
button on the remote control until the
hour digits flash on the display�
2� Press the / buttons on the remote control to adjust the hour digits, and then press the
TIMER/SLEEP
button on the remote control to confirm, the minute digits will flash on the display�
3� Press the / buttons on the remote control to adjust the minute digits, and then press the
TIMER/SLEEP
button on the remote control to confirm, the tuner timer will flash on the display�
4� Press the / buttons on the remote control to select
BUZZER
,
DISC
,
USB
or
FM
mode, and
then press the
TIMER/SLEEP
button on the remote control to confirm, the display will show the
volume level�
5� Press the / buttons on the remote control to adjust the volume, and then press the
TIMER/SLEEP
button on the remote control to confirm, the display will show the selected timer
and “ ” will flash on the display�
•
Activate and Deactivate the Alarm Timer
– Press the
TIMER/SLEEP
button on the remote control to view the alarm settings or activate
the alarm�
– The alarm is active when “ ” is shown in the display on the front of the unit�
– To deactivate the alarm, press the
TIMER/SLEEP
two times� The “ ” will disappear from the
display on the front of the unit�
– To activate the alarm, press the
TIMER/SLEEP
two times� The “ ” will show from the display
on the front of the unit�
•
Stop Alarm Ring
– When the alarm rings, press the button on the remote control or on the unit� The alarm stops
but the alarm settings remain�
Set the Sleep Timer
This unit can switch to standby automatically after a set period of time�
1� Press the
TIMER/SLEEP
button on the remote control repeatedly to select your desired number
of minutes� The number of minutes shown will display in this sequence:
SLEEP 90
SLEEP 60
SLEEP 30
SLEEP 15
SLEEP 00
2� Stop pressing the
SLEEP
button when your desired number of minutes is displayed� The sleep
timer is now set�
– Press the
SLEEP
button to view the remaining time before switch off�
– To cancel the sleep timer, press the
SLEEP
button repeatedly until “SLEEP
00
” shows on the display�
AUX operation
– Ensure that the unit is connected to the TV or audio device�
1� Press the
button on the main unit or press the
BT/AUX
button on the remote control to
select
AUX
mode�
2� Operate your audio device directly for playback features�
3� Press the
VOL +/–
button to adjust the volume to your desired level�
127
126
GB
GB