
15
16
GB
GB
This symbol indicates the location of the coldest zone of the refrigerator.
The area is near the fan,and above by the symbol or the rack positioned
at the same height.
If the indicator of temperature turns WHITE, this means that the
temperature is too high , in this case, increase the refrigerator temperature control
setting and wait for 12 hours before performing a new visual inspection of the indicator.
When fresh food has been introduced or the door has been left open,it is possible for
the indicator of temperature to turn WHITE after a while.
To ensure the temperatures in this area, do not change the positioning
of the shelf.
TEMPERATURE INDICATOR SETTING
To help you set your refrigerator well, it is equipped with a temperature
indicator that will monitor the average temperature in the coldest zone
WARNING: This indicator is intended to work only with your refrigerator,
do not use it in another refrigerator (in fact, the coldest zone is not the same),
or for any other use.
CHECKING THE TEMPERATURE IN THE COLDEST ZONE
With the temperature indicator you can check regularly
.
that the temperature
of the coldest zone is correct. Indeed. the internal temperature of the refrigerator
depends on several factors such as the ambient temperature of the room, the
amount of food stored and the frequency of door opening. Take these factors into
consideration when setting the device.
When the indicator shows
《
OK
》
,this means that your thermostat is well adjusted
and the internal temperature correct.
Coldest zone in the refrigerator
Refrigerator chamber
Here is a boss on the liner
liner of door
bottle shelf
Bottle Shelf
Disassembly: Hold both sides of the bottle shelf with both hands.
Push it from the side without the boss and push it inward as the
direction of the arrow. When pushing hard, please note that
the buckle on the edge of bottle shelf is separated from the
groove of the liner. Then bottle shelf can be removed.
Installation :Hold both sides of the bottle shelf with both hands.
Install the buckle of the boss side at first. Then push the other
side inward slightly, the buckle can be fixed.
The refrigerator chamber is mainly used to store foods that are preserved
for a short time.
The refrigerator chamber is suitable for storing and other foods that
will be eaten recently. It is suggested to seal and then put them into
the refrigerator.
Suggested sections of refrigerator chamber for various foods and
variety name:
1.Top tray: dairy products, odorous foods, etc.;
2.Glass shelve: wheaten foods, milk, etc.;
3.Drawer: fruits, vegetables, etc.;
4.Water tank:Only direct drinking water or mineral water can be stored
in the water tank.
4