Installation
NOTE:
The appliance design is subject to change without prior notice�
Position the appliance and allow it to stand for two to three
hours before it is turned on for the first time to allow the system
to settle� Do not position next to any heat source e�g� cooker,
boiler or in direct sunlight etc�
Allow at least 10 cm of space at the top and 10 cm of space
on both sides of the appliance and between the back of the
appliance and the wall for adequate air circulation� The appliance
is not designed for recessed installation (“building in”)�
Install on a good firm level surface, and any unevenness of the
floor should be corrected prior to installation, slight unevenness
can be overcome by adjusting the front feet�
NOTE:
If the appliance is positioned on a carpet, soft floor
covering you should readjust the front feet once the appliance
has had time to settle�
13� Storage box
14� Right-hand bottle
15� Temperature setting pole
16� Chilling room
17� Right-hand middle bottle
18� Right-hand lower bottle
19� Crisper
Description of the device
1
2
3
4
5
6
7
8
9
19
18
17
16
15
14
13
12
11
10
1� Left-hand bottle
2� Left-hand middle bottle
3� Left-hand middle bottle
4� Crisper cover
5� Left-hand lower bottle
6� Upper freezer drawer tray
7� Upper freezer drawer
8� Ice maker
9� Lower freezer drawer
10� Shelf
11� LED light
12� Two-piece sliding shelves
29
28
GB
GB
