SAB xFinder 2 User Manual Download Page 3

 

 

 

 

 
 

 
 
 

 

 

 

1. SAFETY   

This 

HD Xfinder

 has been manufactured to satisfy the international safety standards. 

Please read the following safety precautions carefully. 
 

MAINS SUPPLY:

 

100 - 240V AC 50/60Hz

 

 

 

OVERLOADING

: Do not overload wall outlet, extension cord or adapter as this may result in fire or 

electric shock. 

 

LIQUIDS:

 Keep liquids away from the HD Xfinder. The apparatus shall not be exposed to dripping or 

splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 

 

CLEANING:

 Disconnect the HD Xfinder from the wall outlet before cleaning .Use a light damp cloth 

(no solvents) to dust the HD Xfinder. 

 

VENTILATION:

 The slots on top of the HD Xfinder must be left uncovered to allow proper airflow to 

the unit. Do not stand the HD Xfinder on soft furnishings or carpets. Do not expose the HD Xfinder to 
direct sunlight or do not place it near a heater. Do not stack electronic equipments on top of the HD 
Xfinder. 

 

ATTACHMENTS: 

Do not use any attachments that are not recommended as these may cause 

hazard or damage the HD Xfinder.

 

 

CONNECTION TO THE SATELLITE DISH LNB:

 Disconnect the HD Xfinder from the mains before 

connecting or disconnecting the cable from the satellite dish.   

 

FAILURE TO DO SO CAN DAMAGE THE LNB. 

 

CONNECTION TO THE TV:

 Disconnect the HD Xfinder from the mains before connecting or 

disconnecting the cable from the satellite dish.   
FAILURE TO DO SO CAN DAMAGE THE TV. 

 

EARTHING:

 The LNB cable MUST BE EARTHED to the system earth for the satellite dish. 

 

LOCATION:

 Place the HD Xfinder indoor in order not to expose to lightening, rain or sunlight. 

 

 

2. INTRODUCTION   

Thank you for purchasing the HD Xfinder. 
This HD Xfinder can fast spectrum analysis with 950 ~ 2150 MHz frequency span. Support 
Constellation Chart. it has a High resolution 7"TFT LCD and a lithium battery can work at outdoors. It 
has a 2GB of U disk , so you needless schlep hard disk when it work at outdoors. And also use as a 
DVB-S+T/C Xfinder on a TV.   

 

This HD Xfinder is fully compliant with the international DVB standard and thus transmits digital 
images, sounds, information guides and teletext directly to your TV or Xfinder through the satellite 
broadcasting.  
Now you can comfortably see and receive digitally transmitted music, news, movie and sports satellite 
broadcasts in your office or at your home.   
In service search section, both the automatic service search method and the manual search mode 
are provided. Also it supports DiSEqC 1.0, 1.2 and USALS, enabling you to move your antenna in 
order to focus preferred satellite. You can save up to 6000 TV and Radio services and work around 
with the favorite, Lock, Delete, Move and Sort functions. 
The menu is very modern and supports multiple languages. All functions can be carried out using the 
remote control and some of the functions can also be carried out using the front panel. The HD 

Summary of Contents for xFinder 2












































Reviews: