SAB Nova 3300 FTA, User Manual, Page: 9 / 38

8
5. Satellite Setting
You can press Red key to set SAT/TP Manager. Press Green key to start channel search.
1. Satellite: In this item, press [Left/Right] key can switch Satellites and press [OK] key can enter satellite
list for you to select directly
2. LNB Freq: In this item, press [Left/Right] key can select the parameter. Option is
5150,5750,9750,10600,10750,11300,11475,17250,18250,19250,20250,21200,5150/5750,
9750/10600, 9750/107500 and MDU-1,MDU-2,MDU-3,MDU-4
3. DiSEqC1.0/1.1: You can use [Left/Right] key to switch options. There are several options for your
selection:
DiSEqC1.0: NONE,1/4,2/4,3/4,4/4,ToneburstA, ToneburstB
DiSEqC1.1: NONE,1/16,2/16,…,16/16
4. 22K: You can use [Left/Right] key to switch “ON / OFF”. When this item is switched to “ON”, receiver
will receive TV and radio input signal from 22K port. If the item is switched to “Off”, the receiver will
receive all signal from 0 K port
Notice!
When you choose LNB type “****/****”, you can not modify 22K.
5. Polarity: In “Polarity” item, [Left/Right] key to switch “OFF
、
18V
、
13V
、
13/18V” functions
6. Motor
：
You can use [Left/Right] key to set Antenna type by Motor
7. Unicable
：
You can use [Left/Right] key to set unicable enable or none
Motor Setting:
When select Motor Type: USALS
If you select “DiSEqC1.2”, “Local
Longitude / Local Latitude” is not
available. It will show the screen
like left
When the highlight on the mode
item
，
You can use [Left/Right] key
to set Motor function