SAB JOLLY PRESTIGE 1GR User Manual Download Page 7

Technical data

Voltage

 

Please refer to the technical data plate on the machine

Wattage

 

Please refer to the technical data plate on the machine 

Temperature

 

 The machine should not be operated with temperatures under 
6°C   and over 36 °C.

Water

 

 The machine has to be used with fresh, soft, clean drinking water. 

 

The water hardness being between:

 

50   to   100  American degrees

 

7   to   14   German degrees

 

4   to   8   French degrees

    

Please install a water fi lter if necessary.

Water pressure from the mains

   Maximum water inlet pressure is 6 Bar (0,6 MPa – 600 KPa).

 

 Please install a pressure reducing valve if water pressure from 
the mains is higher. 

 

The minimum water pressure is 1.5 Bar (0.15MPa-150 KPa).

Hydraulic connections

 

Water inlet 3/8” gas.

Machine ventilation 

 

Please  make  sure  that  there  is  an  open  area  of  at  least  100 
mm  on  each  side  and  behind  the  machine  to  allow  adequate 
ventilation. 

Boiler capacity

 

6.3  litres 

1 group 

 

6.5  litres 

2 group Compact

 

12  litres 

2 group

 

18  litres 

3 group

Dimensions

Version

Width mm

Depth mm

Heighth mm

1 group

370

535

521

2 group Compact 

 

 560

535

521

2 group

665

535

521

3 group

905

535

521

User Manual - Jolly Prestige

2014 – Page 6

Specifications subject to change without notice

SV JOLLY.pdf   1   17/10/2014   4:46 pm

Summary of Contents for JOLLY PRESTIGE 1GR














Reviews: