34
4.4.3 UPnP
The default UPnP status is closed. You can enable UPnP, then the camera's software will be configured for
port forwarding. Back to the
Device Status
panel, you can see the UPnP status:
The camera's software will be configured for port forwarding. There may be issues with your routers security
settings, and sometimes may error. We recommend you configure port forwarding manually on your router .
4.4.4 Port
This camera supports HTTP Port / HTTPS Port / ONVIF Port. HTTP Port is used to access the camera
remotely.
HTTP port
: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1
and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
Another way to change the HTTP port no.
Step 1
: Open the Equipment Search Tool, select the camera you would like to change the port of, right click on
the IP address, and click on ”Network Configuration”, this brings up the network configuration box .
