SAB goblin 570 kyle stacy edition, User Manual

Page: 27 / 40

HC074
HC206
Serial Number
Serial Number Tag
In bag 9, you will find the serial number tag for your helicopter.
Install the tag on the servo support plate as shown.
Please remember to register your product.( See page 1 )
Flat Head Socket
Cap Screws M2,5x5mm
(HC128-S)
Serial Number
(H0286)
CANOPY
- The canopy touches the frames on the Goblin, this is normal and expected as it is part of the design. To avoid
canopy damage due to high frequency vibration, it is necessary to attach the adhesive foam tape HA006 to the
canopy. [Bag 8] (Fig 2).
- Install the canopy grommets [Bag 8] as shown in Figure 2.
- Assembly the Edge Protection with a litle super glue. [HA112] Figure.3
- The canopy locks in the front as shown by the arrow in Figure 4 and in the rear by the canopy screws H0248-S [Tray 2] (Fig 1).
- The process of installing the canopy is facilitated following the Figure 5.
PUSH
PUSH
PULL
PULL
Bag 8, Bag 9
Page 25
Chapter 15, Canopy & Serial Number