SAB Heli Division GOBLIN KRAKEN 580, Manual

Page: 43 / 48

- 1 x Blade Grip.
- 1 x Thrust Bearing 8x 14x4mm.
- 2 x Bearing 8x 14x4mm.
- 1 x Washer 11x 13.5x0.5mm.
- 1 x Socket Head Cap M4x10mm.
Main Blade Grips
[H1201-S]
Swashplate
[H1204-S]
Main Pulley
[H1213-S]
- 1 x Swashplate Assembly.
- 7 x Uniball M3.
- 1 x Reference Pin.
- 1 x Main Pulley.
- 1 x One Way Bearing 10x 14x12.
- 2 x Ball Bearing 10x 15x12mm.
- 1 x Bushing 10x 13x1.5.
Battery Carbon SET
[H1141-S]
- 1 x Xross Battery.
- 1 x Carbon Pin Support.
- 1 x Head Cap M2.5x12mm. - 1 x Alu Pin.
- 2 x Head Cap M2.5x8mm. - 1 x Brass lever.
- 5 x Flat Screws M2.5x5mm. - 2 x Washer M2.5.
- 1 x Wire Cover.
- 1 x Finishing Washer M3.
- 1 x Head Cap Screws M3x8mm.
- 2 x Button Cap Screws M2.5x6mm.
Wire Cover
[H1107-S]
- 1 x Center Hub.
- 1 x Socket Head Cap M4x20mm.
- 2 x Socket Head Cap M2.5x12mm.
- 1 x Nylon Nut M4.
Center Hub
[H1200-S]
Rear Servo Support
[H1206-S]
- 1 x Rear Servo Support.
- 2 x Socket Head Cap M3x8mm.
Front Tail Pulley
[H1214-S]
- 1 x Front Tail Pulley.
- 1 x Socket Head Cap
Shoulder M3x18mm.
Motor Mount
[H1215-S]
- 1 x Motor Mount.
- 2 x Set Screws M4x15mm.
- 2 x Washers 4.3x 11x1.
- 2 x Nylon Nuts M4.
- 2 x Finishing Washers M2.5.
- 2 x Head Cap Screws M2.5x8mm.
Damper
[H1216-S]
- 2 x Damper A.
- 2 x Damper B.
- 2 x Damper C.
Main Frame
[H1218-S]
- 1 x Main Frame.
- 2 x Battery Tray Guide.
- 4 x Button Cap Screws M2.5x6mm.
- 2 x Head Cap Screws M2.5x10mm.
- 2 x Washer 3.2x 6x0.5mm.
Battery Tray Guide
[H1219-S]
- 2 x Carbon Canopy Base Support.
Carbon Canopy Base Support
[H1221-S]
Boom Connetion
[H1224-S]
- 1 x Boom Connetion.
- 4 x Head Cap Screws M3x10mm.
- 4 x Shim 8x 14x0.2mm.
- 1 x Low Side Frame Connection.
- 4 x Nylon Nut M2.5.
Low Side Frame Connection
[H1225-S]
- 4 x Oring 70 .
- 4 x Oring 90 .
Page 42
SPARE PARTS