1
2
3
1
4
FBL Assembly
Double-sided
Tape
FBL support
(H0250-S)
Socket Head
Cap M2.5x6mm
(HC018-S)
Finishing
Washer M2.5
(H0255-S)
FBL System Installation
We recommend the use of a one unit flybarless system, i.e. Mini vBar, Microbeast, etc. However, a two unit flybarless system can also be
installed.
For one unit systems, the unit is installed as shown in position 1. See Fig 1,2,3.
Position 2 and 3 can be used for RX System.
Two unit FBL systems can be installed as follows: control unit in position 1 and sensor in position 4 or vice-versa.
To obtain the position 4 use H0313 [Bag 8.1].
FBL
BEC/RX Support
(H0309-S)
Socket Head Cap
Screw M2.5x6mm
(HC018-S)
Finishing Washer M2.5
(H0255-S)
Electronic
Support
(H0313-S)
Bags 6.2, 6.3
Page 19
Chapter 11, Installation of FBL & RX
