Saab 92X, Owner'S Manual, Page: 344 / 445

11-18
Maintenance and service
18 February 2004
1) Rubber gaskets
3. After refilling the reserve tank and the radiator, re-
install the caps and check that the rubber gaskets in-
side the radiator cap are in the proper position.
!
Be careful not to spill engine coolant when
adding it. If coolant touches the exhaust pipe, it
may cause a bad smell, smoke, and/or a fire.
!
Do not splash the engine coolant over paint-
ed parts. The alcohol contained in the engine
coolant may damage the paint surface.
!
Changing the coolant
1) Drain plug
Always add genuine cooling system conditioner when-
ever the coolant is replaced.
Change the engine coolant and add genuine cooling
system conditioner using the following procedures ac-
cording to the maintenance schedule.
1. Remove the under cover.
2. Place a proper container under the drain plug and
loosen the drain plug.
3. Loosen the radiator cap to drain the coolant from
the radiator. Then drain the coolant from the reserve
tank. Tighten the drain plug securely.
1
HSB026BB
1
HSB027BB