17
Safety
WARNING
• Safety belts are designed to bear upon
the bony structure of the body, and
should be worn low across the front of
the pelvis or the pelvis, chest and
shoulders, as applicable; wearing the
lap section of the belt across the
abdominal area must be avoided.
• Safety belts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection for
which they have been designed. A
loose belt will greatly reduce the pro-
tection afforded to the wearer.
• Care should be taken to avoid contam-
ination of the webbing with polishes,
oils and chemicals, and particularly
battery acid. Cleaning may safely be
carried out using mild soap and water.
The belt should be replaced if webbing
becomes frayed, contaminated or
damaged.
• It is essential to replace the entire
assembly after it has been worn in a
severe impact even if damage to the
assembly is not obvious.
• Belts should not be worn with straps
twisted.
• Each belt assembly must only be used
by one occupant; it is dangerous to put
a belt around a child being carried on
the occupant´s lap.
• No modifications or additions should
be made by the user which will either
prevent the safety belt adjusting
device from operating to remove
slack, or prevent the safety belt
assembly from being adjusted to
remove slack.
95_US_MY09.book Page 17 Tuesday, April 15, 2008 11:03 AM
Summary of Contents for 9-5
Page 10: ...10 This page has been left blank 95_US_MY09 book Page 10 Tuesday April 15 2008 11 03 AM...
Page 42: ...42 Safety This page has been left empty 95_US_MY09 book Page 42 Tuesday April 15 2008 11 03 AM...
Page 272: ...272 Notes Notes 95_US_MY09 book Page 272 Tuesday April 15 2008 11 03 AM...