4. Press and release the switch to turn the air inflator
on. The indicator light will remain on when the
inflator is running.
The system has an internal clock to prevent the
system from overheating. The system will allow
about five minutes of running time, then the
compressor will stop. The indicator light will
then begin to flash. When the indicator is off,
the inflator can be started again by pressing the
switch. If the compressor is still hot, it may only
run for a short time before shutting off again.
5. Press and release the switch to turn the inflator off.
Place the inflator kit tools in the pouch and store it in
its proper location. Remove the inflator hose from the
outlet during loading and unloading. Load leveling will
not function with the inflator hose attached to the inflator
outlet. See Electronically Controlled Air Suspension
System on page 4-28 for more information.
To reinstall the cover, line up the tabs at the back of the
cover, put it in place and latch the tabs.
If the indicator light on the accessory inflator flashes
continuously, it could indicate that there is a malfunction
in the air suspension system. See Electronically
Controlled Air Suspension System on page 4-28
for more information.
5-84
Summary of Contents for 2008 9-7x
