Saab 2007 9-7X, Owner'S Manual

Page: 393 / 498

Always check the TPMS malfunction telltale after
replacing one or more tires or wheels on your
vehicle to ensure that the replacement or alternate
tires and wheels allow the TPMS to continue to
function properly.
The Tire and Loading Information label
(tire information placard) shows the size of your
vehicle’s original tires and the correct inflation
pressure for your vehicle’s tires when they
are cold. See
Inflation - Tire Pressure on
page 388 . For the location of the tire and loading
information label, see Loading Your Vehicle
on page 296 .
Your vehicle’s TPMS can alert you about a low
tire pressure condition but it does not replace
normal tire maintenance. See
Tire Inspection and
Rotation on page 396 and Tires on page 380 .
Notice: Do not use a tire sealant if your
vehicle has Tire Pressure Monitors. The liquid
sealant can damage the tire pressure monitor
sensors.
TPMS Sensor Identification Codes
Each TPMS sensor has a unique identification
code. Any time you replace one or more of
the TPMS sensors or rotate the vehicle’s tires, the
identification codes will need to be matched to
the new tire/wheel position. The sensors are
matched to the tire/wheel positions in the following
order: driver’s side front tire, passenger’s side
front tire, passenger’s side rear tire, and driver’s
side rear tire using a TPMS diagnostic tool.
See your dealer for service.
The TPMS sensors may also be matched to
each tire/wheel position by increasing or
decreasing the tire’s air pressure. When increasing
the tire’s pressure, do not exceed the maximum
inflation pressure indicated on the tire’s sidewall.
393