Saab 2004 9-3 Remote Starter, Owner'S Manual

Page: 36 / 288

36 Safety
Airbag warning lamp Servicing the airbag system
The airbag system must be inspected as
part of the normal service program but oth-
erwise may be regarded as maintenance-
free.
Scrapping or working on airbag and
belt pretensioners
WARNING
• If the airbag readiness light stays on
after you start your vehicle, it means
the airbag system may not be working
properly. See page 77.
• The airbags in your vehicle may not
inflate in a crash, or they could even
inflate without a crash.
• To help avoid injury to yourself or
others, have your vehicle serviced
right away if the airbag readiness light
stays on after you start your vehicle.
WARNING
• Under no circumstances should any
modifications be made that affect the
steering wheel or the airbag’s electri-
cal circuitry.
• During any welding, both battery
cables must be disconnected and
covered.
• Before quick drying paint in the vicinity
of the electronic control module, the
module’s grounding points and wiring
must be covered.
• Airbags and safety belt pretensioners
must be deployed under controlled
conditions before the car is scrapped
or any of the system’s components are
removed. Airbags or belt pretension-
ers that have been deployed as a
result of a crash must be replaced by
new ones.
• Airbag-system components must
never be transferred for use in another
vehicle.
• All work involving the scrapping or
replacement of airbags or belt preten-
sioners must be carried out by autho-
rized personnel only.