14 12 788 466
Saab 9-3 4D M03-
53 Remove the cover on the cable duct, check that
the fibre optic cable cannot bend and fit the con-
nection on the fibre optic cable in position 1 in
the small connector for the amplifier. Fit the lock.
54 Fit the small connector to the large connector.
55 Fit the cover to the cable duct, draw back the
carpet and guide out the connector and the
cables through the hole in the carpet.
56 Connect and fit the amplifier.
Important
Handle the fibre optic cables with care or the
signal may be distorted.
·
It is very important that the two leads in the
connector are not confused with one another.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Keep the cable ends free from dirt and grime.
·
Do not expose the cable to impact as this may
cause the transparent plastic to whiten,
thereby reducing the intensity of the light and
causing possible communication interruptions.
·
The cable should not lie against any sharp
edges as this may cause increased signal
reduction.
F930A156
56
53
53
56
54
53,55
