12 788 445 13
Saab 9-3 M03-
45 Fit the bracket. Tighten the nut on the top side of
the bracket.
46 Fit the side trim pieces.
47 Fit the new panel in the luggage compartment
left-hand side trim and raise the panel on the
right-hand side.
48 Lower the loading floor.
49 Connect the negative battery cable.
50 Adjust the time and date.
51 Synchronise remote control code by inserting
the key into the ignition.
52 Activate window lift pinch protection function by
operating the side windows up and down twice.
An audible confirmation will sound when activa-
tion is complete.
53 Connect the diagnostic tool, select car and mod-
el year, select “All”, select “Add/Remove”, select
the accessory and then “Add”.
54 Check system function.
Important
Handle the fibre-optic cables with care or the sig-
nal may be distorted.
·
It is very important that the two leads in the
connector are not confused with one another.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Keep the cable ends free from dirt and grime.
·
The cable should not lie against any sharp edg-
es as this may cause increased signal reduction.
Important
Repeat this procedure with all keys. Otherwise,
the remote controls will not function.
F930A112
45
45
45
45
45
45
45
Note
The diagnostic tool will on some occasions need
to retrieve a security code in TIS. Information on
what to do will be displayed on the diagnostic tool
display.