12 788 458 5
Saab 9-3 M03-
9 Remove the fibre optic cable connector (small
connector) from the control panel connector.
10 Remove the fibre optic cable connected to posi-
tion 1 by opening the connector locking clip and
carefully lifting the hook.
11 Insert the long section of the fibre optic cable in
the accessory kit along the car's normal cable
harness inside the dashboard.
12 Remove the protective cover from the connection
on the accessory kit fibre optic cable.
13 Fit the protective cover onto the removed fibre
optic cable connection and carefully move the
fibre optic cable aside in order to prevent damage.
14 Fit the accessory kit fibre optic cable connection
in position 1 in the small connector to the control
unit. Fit the locking clip.
15 Fit the small connector to the large connector.
Important
Handle the fibre-optic cables with care or the signal
may be distorted.
·
It is very important that the two leads in the
connector are not confused with one another.
·
Do not splice the cables.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Do not expose the cable to temperatures
exceeding 85 °C.
·
Keep the cable ends free from dirt and grime.
·
Do not expose the cable to impact as this may
cause the transparent plastic to whiten, thereby
reducing the intensity of the light and causing
possible communication interruptions.
·
The cable should not lie against any sharp edges
as this may cause increased signal reduction.
F930A059
10
9
