SeismicAudioSpeakers.com
Facebook.com/SeismicAudio
Twitter.com/SeismicAudio
1-877-347-6423
Page 7
Connection Example 1
Standard 3-Pin XLR
Microphone Cables (Male
to Female)
This example shows how to connect two SA-15T-PW speakers to a standard Mixer. This application requires (2)
XLR 3 pin male to female cables. Seismic Audio offers these cables. The model number is: SAXLX-25.
To start, take the female end of the first cable and insert it into the output jack labeled
MAIN OUT LEFT
on your
mixing board. Then insert the male end of the cable into the XLR input of the first or left SA-15T-PW speaker.
Repeat these steps using the other cable and insert the female end into the
MAIN OUT RIGHT
on the mixing board,
followed by inserting the male end of the cable to the second or right SA-15T-PW speaker.
