Step 15
This edge will be snug
against the front BRACE
on the LEFT PEDESTAL.
The LOCK MECHANISMS
will face each other when
locked in place.
å
Fasten the LONG TOP MOLDING (V) to the LONG TOP (G). Use three SILVER 1-5/8" FLAT HEAD SCREWS (152S).
å
NOTE: You should start each SCREW a few turns before completely tightening any of them.
å
Turn the two LOCK MECHANISMS inside the LEFT PEDESTAL toward each other until they stop moving.
å
Turn the LOCK MECHANISM behind the LONG TOP MOLDING (V) toward the DRAWERS until it stops moving.
G
V
LEFT PEDESTAL
The LOCK MECHANISM will
face toward the DRAWERS
when locked in place.
SILVER 1-5/8" FLAT HEAD SCREW
(3 used in this step)
152S
The angled edge
should be toward the
inside of your unit.
Unfinished sur
face
427803
www.sauder.com/commercial-office/service
Page 21
