S4A TF1, User Manual, Page: 8 / 10

- 8 -
Enter programming Menu Operation steps Description
Default
value
Press * Admin code #
(Default admin code is
"999999")
new admin code #
01
Read card / Input a
fingerprint twice *
Set admin add card or admin add
fingerprint
02
Read card / Input a
fingerprint twice *
Set admin delete card or admin
delete fingerprint
03
0# Reader mode
1
1# Standalone access control mode
2# Relay toggle mode
11
Input a fingerprint
twice, ... *
Add fingerprint users continuously
“…” means
repeating
the previous
operation,
Press * key
to exit.
Press ID number #
Input a fingerprint
twice … *
Add fingerprint users by specific ID
number
Press * Admin code #
(Default admin code is
"999999")
21
Input a fingerprint
once … *
Input
the 2
nd
fingerprint ... *
Delete fingerprint users continuously
Press ID number
# … * Delete users by the specific ID
number
20 0000# Delete ALL users
42
0#
Alarming time sets 0S, means no
alarm
0
(1-99)# Alarming time range: 1-99 min
51 (0-255)# Set device number 0
52 (26-58)# Wiegand output
：
26-58 bits 26
53
0# Keypad transmission format 4 bits
0
1# Keypad transmission format 8 bits
2# Virtual card number output
62
0# Disable light indicator
1
1# Enable light indicator
63
0# Disable the keypad backlight
1
1# Enable the keypad backlight
(2-99)# Time of keypad backlight: 2-99 sec
64
0# Disable buzzer
1
1# Enable buzzer
9. Admin Card Operation
9.1 Add Card
Read admin add card , Read the 1
st
user card Read the 2
nd
user card
…,Read admin add card