S3 0312FC, Operator'S Manual, Page: 8 / 58

Page | 5
4.4
Operational Safety
Before operating, maintaining, adjusting or dis-
connecting the Aeration Fan, turn the machine to
off, wait for all the moving parts to stop, and
unplug the electrical cord. If your aeration fan does
not connect via a plug, turn off primary power
supply and Lockout- tag out the equipment.
4.5
Emergency Shutdown Procedure:
In case of emergency, immediately shut off the
Aeration Fan power source. To minimize the
potential of injury, it is recommended that you:

Read and understand the Operator’s Manual
and all Safety Signs before operating.

Do not operate if any of the guards or shields
are removed or damaged.

Do not wear loose fitting clothing that may
catch in moving parts.

Be sure there are no tools or other foreign
objects laying on or in the machine or
blocking the inlet.

Do not allow children, spectators, or
bystanders within the work area.

Do not start the machine until you are sure
everyone is clear.

Be sure the machine is mounted properly to
the bin.

Be sure the electrical cords are not damaged
in any way.

Accumulation of dirt or foreign material in
the blower rotor may cause imbalance or
excessive vibration. Inspect daily, thoroughly
clean when necessary.

Keep hands, feet and clothing away from
moving parts, especially the air intake area
of the fan.

Do not clean, adjust or lubricate your
equipment while it is running.

Never sit or stand on this machine while it is
in operation.

Stay clear of fan discharge area.
4.6
Storage

Store the fan on a firm, level surface.

Store away from areas of human activity.

Do not permit children to play on or around
the fan.
4.7
Preventing Bin Damage

Ensure there is enough venting on the bin
roof to minimize condensation.

Only use the fan in a positive aeration
system. Do not use the fan on a bin in a
suction / negative pressure aeration
system.

Be sure all roof vents are open and
unobstructed before fan is started.

Do not operate fan when conditions may
cause roof vent or intake ports to freeze.
4.8
Maintenance Safety
Before operating, maintaining, or disconnecting
the fan, turn fan off, disconnect power, and wait
for all moving parts to stop, then Lockout- tag out
equipment.
Failure to follow all the safety instructions below in
Maintenance Safety Section can result in serious
injury, death and/or property damage.
Prior to initiating any maintenance, it is critical that
the following pre-maintenance protocol is
followed: