A: Please do the following:
Make sure the Receiver is turned on and the LED indicator
is flashing blue and red.
Make sure the Receiver and the BT device are close to each
other within 3 feet.
Turn off the Receiver and the BT device, then turn on the
Receiver and then restart BT device. Then retry the pairing
method.
Make sure your Bluetooth device supports A2DP.
Q: After pairing, the Receiver disconnects or these is too
much background noise.
A: Please do the following:
Recharge your Receiver, the power may be too low.
Units are out of range (10 meters maximum). Bring units
closer together.
Remove any object (electrical or magnetic) that may be
interfering or blocking the signal between units.
Q: After pairing and connecting with my BT device, I can not
hear music/audio.
A: Please check the following:
Summary of Contents for Loop R8
Page 1: ...R8...
