12
W P C - 1 To g g l e S w i t c h O p e r a t i o n
The WPC-1 receiver box houses two toggle switches. For operation with the wireless transmitter, the
toggle switches need to be in the
REMOTE
position.
To manually turn
ON
a device connected to Circuit 1 (12 VAC) or Circuit 2 (120 VAC), flip the switch to
the
ON
position.
To manually turn
OFF
a device, flip the switch to the
MIDDLE
or
OFF
position.
NOTE:
If a toggle switch is in the
OFF
position, wireless remote operation of the device will be disabled.
To re-enable wireless remote operation, flip the toggle switch back to the
REMOTE
position.
NOTE:
If a device turns
ON
when the toggle switch is set to the
REMOTE
position, turn the wireless
remote button
OFF
to turn off the device.
The toggle switches on the WPC-1 must be set to REMOTE for wireless operation.
The POWER ON/OFF buttons control each circuit independently. With each push of
the button, the WPC-1 toggles from ON to OFF or OFF to ON. For Synchronized
operation, both WPC-1 toggle switches must be set on REMOTE before pushing the
SYNC ON/OFF button.
UNITS EQUIPPED WITH TOGGLE SWITCHES
NOTE: CIRCUIT 1 IS IN THE ON POSITION AND CIRCUIT 2
IS IN THE REMOTE POSITION
Summary of Contents for WPC1-T Series
Page 2: ...2 ...