| 0419
2
TM
FAQ’s
SET-UP AND USE
Q: SlideAway comes partially assembled. What does that mean?
SlideAway comes with three main pieces: the main slide assembly, the stability brace and the dolly to move the slide
into place on the deck. The hose assembly parts will need to be installed using a Phillips head screwdriver or screw
gun and Teflon tape or thread sealant tape (not included). Refer to the SlideAway
and our set-up
video for more details.
Q: What tools will I need to assemble the SlideAway?
SlideAway comes with three main pieces: the main slide assembly, the stability brace, and the dolly to move the slide
into place on the deck. The hose assembly parts will need to be installed using a Phillips head screwdriver/screw
gun and Teflon tape/thread sealant tape (not included). Refer to the
and our set-up video for more
details.
Q: How deep does the water need to be to use the SlideAway?
- Pool water depth at the base of the slide should be at least 3’/92 cm deep, and at
4’6”/137 cm out from slide exit, the water should be at least 4’6”/137 cm deep.
- The height of the slide runway exit above the water should be 20”/51 cm maximum.
- The distance between the slide centerline and the edge of other pool equipment should
be at least 3’6”/107 cm.
Refer to the SlideAway
(figure 14) and our set-up video for more details.
Q: How long does the SlideAway take to set-up?
SlideAway can typically be set-up in under thirty minutes. Please review of set-up video at slideaway.com to see how
fast and easy it is to set-up on the deck.
