13
W i r e l e s s R e m o t e O p e r a t i o n
The new poolLUX Plus wireless remote system is shipped ready to use and requires no additional
programming. In the event that another poolLUX Plus or similar device is installed nearby and is
operating on the same pairing code, that code may be easily changed by setting an alternative code
via the 4 position DIP switch inside the battery compartment of the remote. The receiver board
inside the control panel will also need to be changed to match the new remote settings.
See Pairing Code chart below for additional details.
Note:
The default code as shipped is Code A on both the
remote and the receiver.
Sleep Mode
To conserve battery power, the remote will enter standby mode
when no function has been selected for 30 seconds or more. To
wake the remote, simply press the ‘1’ or ‘S’ button momentarily.
The indicator will light up solid for 5 seconds indicating that
it is ready to transmit. A rapidly flashing light from the LED
indicator that is located between the two command buttons
indicates that a command signal was sent to the control panel.
To Turn On Using the Wireless Remote
Wake the remote out of Sleep Mode, press the (1) button to
turn the system ON/OFF.
Note:
The rocker switch on the poolLUX Plus must be set
to REMOTE for wireless operation.
Color Changing Operation
To change pool light colors, simply toggle the (1) button ON/
OFF within 1 second. Continue toggling until the desired color
or light show is reached.
1-Button - Color Sync / Reset Operation
(For use only with SR Smith LED Treo, FG, Treo Micro &
LED water features)
To color synch lights in a multi-light installation, simply press
the “S” button once and wait 15 seconds. During this time,
the lights will flash on and off several times, pause in the OFF
mode, then reset to color mode 1 (soft color change).
Performance Note:
For best results, hold the remote
vertically (pointed at the sky) when pressing the
command buttons.
PAIRING CODE CHART
DIP Switch
1
2
3
4
Code A
OFF OFF OFF OFF
Code B
ON OFF OFF OFF
Code D
OFF ON OFF OFF
Code C
ON ON OFF OFF
Code E
OFF OFF ON OFF
Code F
ON OFF ON OFF
Code G
OFF ON ON OFF
Code H
ON ON ON OFF
Code I
OFF OFF OFF ON
Code J
ON OFF OFF ON
Code K
OFF ON OFF ON
Code L
ON ON OFF ON
Code M
OFF OFF ON ON
Code N
ON OFF ON ON
Code O
OFF ON ON ON
Code P
ON ON ON ON
Summary of Contents for pLX-PL60
Page 2: ...2 ...
