10
After selecting the parameter, you want
to change, press to activate
the option to edit the value (indicated by
the red DL3 LED that turns on) and use
the and keys to set the desired value.
You can now use the keys to scroll through the various parameters. The
following parameters can be changed: Type of curve, Voltage, and Current.
SELECT
Press again to confirm the set value
(the red DL3 LED will turn off).
SELECT
After setting the values, exit the setup menu
by selecting "Programming Save and Exit"
and press so that the display shows
"
PARAMETERS SAVED
" and the parameters
are saved in EEPROM.
SELECT
If the operator has entered the programming section and is still in it without
operation, the battery charger automatically goes back to the display showing the
charging status after about 30 seconds.
Summary of Contents for ChargePlus Flex
Page 14: ...13 ...
Page 16: ...15 NOTES COMMENTS ...
