S.P.E. 24-CBHF2M-3625FLEX, User Manual

Page: 9 / 16

8
On the next screen, the LCD will display the parameters for:
• Battery voltage
• Charging current
• Number and type of charging curve
36V 25A
01= et 12h
A test is conducted on the battery voltage to decide whether or not to start the
charging process.
If the battery is not connected to the charger, the display shows “
No Battery ”.
This message remains on the display, if the test is unsuccessful. The same
message is displayed in the case of:
• Reversed polarity
• Battery in short circuit
• Battery voltage is lower than 3V
If the battery test is still unsuccessful, the charger
continues to check the voltage on the battery
cables until it detects an acceptable condition.
36V 25A
No Battery