10
CLEANING & MAINTENANCE
Changing or Cleaning the Filter / Pad:
WARNING: Unplug and disconnect the cooler from the power source
before attempting any maintenance or service.
Your cooler pads should be changed at least twice a year, at the beginning of a season and midway
through. But your pads may need to be changed more frequently, depending on local air and water
conditions. For instances, in areas where mineral content of the water is high, deposits may build
up in the cooler pads, restricting air flow.
Cleaning the Water Tank:
To clean the water tank:
Remove the drain plug located at the bottom of the unit.
Once the water tank is empty, replace the drain plug, refill the unit and
drain it again.
Repeat this cleaning weekly to reduce water mineral build up.
Replace the drain plug; refill with fresh water through water-inlet hose,
cooler is ready for use.
TIP:
Regular draining (once a week during use) will decrease the water mineral
build up and extend the life of the filter / pad. Damp a cloth with water and
wipe away any water mineral deposits that appear inside or outside the
appliance to extend the serviceable life and clean appearance of the appliance.
Cleaning the Appliance:
Step 1:
Screw off the two screws at the top of the cooling pad. Hold the
louver above the cooling pad, drag the cooling pad gently, and pull
up slightly to put off the cooling pad for cleaning.
Step 2: