Up/Down
Left/right rotation
When the left stick (throttle stick) is pushed up/down the helicopter will ascend/descend.
When the right stick is moved left/right the helicopter will rotate left/right.
Height Hold
To start the helicopter
Left hand operation
diagram
Flying Instructions
Use the left stick (throttle) to achieve the desired
height and after allow the left stick to fall back to
its default middle position.
When the helicopter is at rest, press the one
key button and the helicopter blades will
automatically rise to a certain height after
slowly rotating.
Method 2:
After starting the helicopter, pushing the left
joystick to the highest point and then returing
to the centre, the helicopter blades rotate
slowly.
Method 1:
1.Turn on the transmitter.
2.To turn on the helicopter, move the on/off switch at the top
of the helicopter to the ON status/position. The power light
will turn on.
3.Place the helicopter on the ground. Make sure the rear
end of the helicopter faces the pilot.
4.Push the left joystick of the remote control to the highest
point and then reset to the lowest point. When the
indicator light on the helicopter changes from flash to
steady light, itindicates that the helicopter pair code is
completed and enters the preliminary flight state.
- 19 -
