0
2
S-Energy
PV Module Installation Manual
Safety Precautions
2.
CAUTION
CAUTION
RECOMMENDATION
Store a module in an indoor warehouse before
installing.
The utmost care is required for preventing corrosion/
contamination/deterioration due to mishandling
when you load/outdoor load/installation.
Working on a PV system requires following all
applicable local codes and wearing protective
equipment, and must be performed by appropriately
qualified and authorized personnel only.
Always wear protective equipment while working
with PV modules.
Do not place heavy objects on the module.
Stepping on or allowing objects to fall on the module
may damage certain parts of the product and slow
down the performance significantly, or causes risks to
the whole system.
Install when the weather is clear.
Do not install when snowy, rainy, and windy days.
Do not install where water remains on the ground.
All surfaces and corners are fragile, so touch only
the frame areas when moving/installing. And do not
allow direct shock or hit to the module.
PV module should be installed by a two person team.
Be careful when handling because the shock may
cause damage or low performance.
These “Safety Precautions” should be thoroughly understood before installing.
※
PV module installation should be performed by qualified person only.
Do not step, stand or sit on the
modules to install and clean.
DANGER
CAUTION
When connecting with '+', '-' in module, the cable shall be equipped with direct current, and shall not connect or
disconnect with module when electricity flows. If an abnormal or old electrode is connected, you may get injured by
sparks arising from direct current.
