- AT ANYTIME DURING PLAYBACK, PRESS THE STOP
KEY TO STOP
OPERATION OF THE SET. THIS WILL RESET THE CD PLAYER TO THE FIRST
TRACK (IF YOU PRESS PLAY AFTER STOP, THE FIRST TRACK WILL ALWAYS
START PLAYING).
INSERTION & REMOVAL OF DISCS
- WHEN OPENING THE CD-DOOR, ALWAYS ENSURE THE DISC IS NOT IN MOTION
(NOT SPINNING) WHEN YOU OPEN THE CD-DOOR. ALWAYS PRESS STOP
KEY TO STOP THE DISC SPINNING FIRST.
- PLACE A CD INTO THE COMPARTMENT WITH THE LABEL-SIDE (PRINTED SIDE
OF DISC) FACING UPWARDS. PRESS DOWN IN THE CENTER PART OF DISC
UNTIL THE DISC "LOCKS" ONTO THE CENTER SPINDLE.
- WHEN THE CD HAS BEEN PLACED ONTO THE CENTER SPINDLE, GENTLY
LOWER THE CD-DOOR DOWNWARDS UNTIL IT LOCKS SHUT.
- THE CD IS NOW READY TO BE PLAYED.
- TO REMOVE A DISC, FOLLOW THE SAME PROCEDURE AS DESCRIBED ABOVE,
EXCEPT TO REMOVE THE CD INSTEAD OF INSERTING IT INTO THE
COMPARTMENT, BY PLACING ONE FINGER AT THE MIDDLE OF DISC
(CENTER SPINDLE) & THE OTHER AT THE EDGE OF THE DISC & GENTLY
PULLING UPWARDS.
- IMPORTANT : ALWAYS HOLD A CD BY ITS EDGES. AVOID GETTING ANY
FINGER PRINTS, SMUDGES OR DIRT ONTO THE SURFACE OF A DISC. IN CASE
THIS HAPPENS, USE A SPECIAL CD-CLEANING CLOTH OR CLEANING KIT TO
REMOVE THE DIRT OR SMUDGES.
NORMAL CD OPERATION
- TURN THE UNIT ON BY PRESS THE ON/
KEY.
- INSERT A CD AS DESCRIBED.
- PRESS THE KEY UNTIL DISPLAY SHOW "CD".
- THE CD WILL SPIN MOMENTARILY AND THE DISPLAY SHOW THE TOTAL
NUMBER OF TRACKS (SONG) OF THE DISC.
- PRESS THE PLAY/ PAUSE KEY, THE FIRST TRACK (SONG) WILL START
PLAYING. THE DISPLAY WILL INDICATE THE CURRENT TRACK NO. ("01" IF IT IS
THE FIRST TRACK), AND CURRENTLY PLAYING TIME FREQUENCY.
STANDBY
FUNCTION
- AT ANYTIME DURING PLAYBACK, PRESS THE
KEY TO
PAUSE OPERATION OF THE UNIT. PRESS THE PLAY/ PAUSE
TO RESUME OPERATION AT THE SAME TRACK & POSITION.
PLAY/ PAUSE
KEY AGAIN
- AT ANYTIME DURING PLAYBACK, "PRESS AND HOLD"
OR TUNE UP KEYS TO FAST-REVERSE (REVIEW) OR FAST-FORWARD
(CUE) THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING.
THE TUNE DOWN
- AT ANYTIME DURING PLAYBACK, "PRESS AND RELEASE" THE TUNE DOWN
OR TUNE UP KEYS TO SKIP BACKWARDS OR FORWARDS BY ONE TRACK,
AS DESIRED.
E-9
E-10
PROGRAM FUNCTION
- AFTER EACH TRACK NUMBER, REMEMBER TO PRESS THE
KEY.
- AFTER A MAXIMUM OF SONGS (OR LESS) HAVE BEEN SELECTED AS DESCRIBED
ABOVE. IF ALL 20 TRACKS HAD PROGRAMMED, THE DISPLAY WILL SHOWS "FULL".
- THE CD PLAYER CAN BE PROGRAMMED TO PLAY ANY SEQUENCE OF UP TO
20 TRACKS FOR AUDIO-CD AS DESIRED.
- ALWAYS PRESS THE
KEY BEFORE STARTING THE PROGRAMMING.
STOP
- PRESS THE KEY ,THE DISPLAY WILL SHOW "01" AND THE DISPLAY
WILL SHOWN A "MEMORY” SYMBOL, TO INDICATE THAT THE SET IS NOW IN
“MEMORY PROGRAMMING MODE", AT THE FIRST MEMORY POSITION.
- REPEAT THE PREVIOUS 2 STEPS, EACH TIME SELECTING ANY TRACK NUMBER
OF YOUR CHOICE TO BE STORED IN THE SUCCESSIVE MEMORY (PROGRAM)
POSITIONS.
- WHEN YOU PRESS
THE DISPLAY WILL ADVANCE TO
THE NEXT MEMORY POSITION (eg. "02").
THE
KEY
- PRESS THE TUNE UP OR TUNE DOWN KEYS TO SELECT THE TRACK
(SONG) NUMBER YOU WISH TO BE STORED IN THE FIRST MEMORY (PROGRAM)
POSITION, AND PRESS THE KEY TO CONFIRM YOUR SELECTION.
PROGRAM
PROGRAM
PROGRAM
PROGRAM
HAVE SAVED A PROGRAM-MEMORY (SEQUENCE).
- PRESSING
PLAY/ PAUSE WILL NOW PLAY BACK THE "SAVED SEQUENCE" IN
THE PROGRAM MEMORY.
- TO CLEAR (CANCEL) THE ENTIRE PROGRAM WHICH IS STORED IN THE MEMORY,
SIMPLY PRESS
STOP
TWICE, OR SWITCH "OFF" THE SET.
- ALSO, THE "MEMORY" SYMBOL WILL REMAIN "ON" TO INDICATE THAT YOU
PLAY MODE FUNCTION
- AT ANYTIME DURING PLAYBACK:
- PRESS PLAY MODE KEY REPEATEDLY TO SELECT THE FOLLOWING OPTIONS:
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER OR A TV TO THIS UNIT, THROUGH THE HIGH QUALITY AMPLIFIER OF
THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO
HEADPHONE (3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE
"HEADPHONE-OUT OR AUDIO LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET
OF THIS UNIT.
- TURN THE UNIT ON BY PRESSING THE
KEY.
- PRESS THE KEY TO SELECT "AUX" MODE.
- SWITCH ON THE EXTERNAL DEVICE (eg. MP3-PLAYER OR TV).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE MAIN UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT WHEN YOU ARE FINISHED USING THE
EXTERNAL DEVICE.
ON/
STANDBY
FUNCTION
1. = REPEAT: TO REPEAT THE CURRENT TRACK
2. ALL = REPEAT ALL: TO REPEAT ALL TRACK
3. = RANDOM: TO SHUFFLE ALL SONGS IN RANDOM ORDER
